With suitcases from the Cargo Air series, your products are well protected when travelling around the world. Whether on land, at sea or in the air – with the Cargo cases you will make a good impression wherever you go. Thanks to the extremely robust birch plywood, you don't have to compromise on the stability of the cases.
Cargo Air flight case with aluminium profiles. Also in black.
Design features of the Cargo Air flightcase
Heavy-duty aluminium frame construction with impact-resistant metal corners
The very sturdy profiles in natural aluminium with triple riveted, stackable metal corners are suitable for higher loads. Optionally also available with metal ball corners.
Individually printable Surf surface in 4 colours & surface PP-honeycomb
The Surf surface made of robust birch plywood is water-repellent and scratch-resistant. Available in four standard colours, optionally in other special colours, with partial or full-surface printing.
Resistant and resilient locks and hinges
The recessed butterfly locks, designed for high loads, provide reliable protection for your products. The case hinges hold the open lid at a 100° angle.
Recessed butterfly handles and sturdy telescopic handle
The recessed butterfly handles are suitable for heavy loads. Case can be stored to save space. Also available as a trolley with sturdy telescopic handle and 2 corner wheels. Also available with heavy-duty metal wheels.
Minimum order quantity 5 pieces
Cargo Air cases and trolleys can be ordered in quantities of 5 or more. A sample case can be offset against the total order.
Made in Germany. Black Forest.
The Faisst production works on an order-related basis in Germany and is based in Birkenfeld in the Black Forest. Our products are constantly being developed further, with the highest standards of quality and design.
Heavy-duty aluminium frame construction with impact-resistant metal corners
The very sturdy profiles in natural aluminium with triple riveted, stackable metal corners are suitable for higher loads. Optionally also available with metal ball corners.
Individually printable Surf surface in 4 colours & surface PP-honeycomb
The Surf surface made of robust birch plywood is water-repellent and scratch-resistant. Available in four standard colours, optionally in other special colours, with partial or full-surface printing.
Resistant and resilient locks and hinges
The recessed butterfly locks, designed for high loads, provide reliable protection for your products. The case hinges hold the open lid at a 100° angle.
Recessed butterfly handles and sturdy telescopic handle
The recessed butterfly handles are suitable for heavy loads. Case can be stored to save space. Also available as a trolley with sturdy telescopic handle and 2 corner wheels. Also available with heavy-duty metal wheels.
Minimum order quantity 5 pieces
Cargo Air cases and trolleys can be ordered in quantities of 5 or more. A sample case can be offset against the total order.
Made in Germany. Black Forest.
The Faisst production works on an order-related basis in Germany and is based in Birkenfeld in the Black Forest. Our products are constantly being developed further, with the highest standards of quality and design.
Variety thanks to the combination of 3 standard surfaces and 2 profile colours
The Surf case surface in 3 standard colours is particularly impressive due to its robustness. Numerous other special RAL colours are available on request. The profiles are available in either natural aluminium or matt black. Select your desired colour here.
Stable, robust & lightweight
Our three case surfaces for Cargo Air: Surf, Phenol and PP-honeycomb
The classic Surf case surface
The Surf surface is particularly characterised by its robustness, which is why it is primarily used for cargo cases. In addition to the three standard colours, the Surf surface is also available in numerous special RAL colours.
The water-repellent case surface phenol
The phenol surface is water-repellent and particularly robust, break-resistant and scratch-resistant.
The lightweight PP-honeycomb case surface
The PP honeycomb surface made of polypropylene hollow chamber panels is extremely light (up to 60% lighter than birch wood) and yet very stable.
Individual branding
Take advantage of our versatile options for printing your case - as a logo print or full-surface print motif.
A logo print or a full-surface advertising motif makes your case attractive from afar and focusses your customers on your company.
Whether screen printing, pad printing or digital printing - we at Faisst offer you the ideal printing process for your desired motif. For example, your company logo can be printed directly onto the surface of the case using screen or digital printing. Modern digital printing for full-surface printing on surfaces opens up new design possibilities.
The Phenol case surface is not printable due to its water-repellent properties.
Enjoy mobility
Cargo Air flightcases are optionally available as a trolley
The tried and tested 2-way telescopic handle from Faisst combined with the functional corner castors make your suitcase a handy piece of luggage. The two castors are large enough to offer maximum comfort even on uneven terrain. The telescopic handle and the corner castors are available in black and also in a metal casing.
Customised case inserts
We customise every case insert to your products - individually, securely, prestigiously.
Your products are unique and of high quality and should be protected in the best possible way and presented in a way that promotes sales. At Faisst, we have the ideal solutions and decades of experience. Our technicians and designers work closely with our customers to achieve the best possible case insert design.
A selection of Cargo Air references
Interested? We will be happy to advise you.
FAQ
How is a custom Cargo Air adapted to products and transport requirements?
When planning a Cargo Air, the contents and intended use are the main focus. As a rule, we develop the transport case from the inside out: based on the quantity, dimensions, weight and desired arrangement of the products, we determine a case size that is as compact as possible. The transport route, handling and required interior equipment are also taken into account. If specific external dimensions have already been defined, the construction can alternatively be planned based on these dimensions.
Which equipment options can be used to configure a Cargo Air individually for demanding transport requirements?
The Cargo Air offers extensive possibilities for individual technical equipment. The basic construction includes sturdy aluminium profiles, triple-riveted metal corners as well as robust latches and handles. Depending on the project, options such as metal ball corners, recessed butterfly latches and handles, lid stays, edge handles, access flaps in the lid or permanently installed internal walls can be added. The components used are selected according to the products, case size, transport route and desired handling.
Which surfaces are available for the Cargo Air and how is the right option selected?
The Cargo Air is available with different case surfaces: Surf, Phenol and PP honeycomb. The option selected depends on the requirements of the project. Surf is based on robust birch plywood and is available in various colours as well as custom RAL colours. Phenol features a particularly robust, break-resistant and splash-resistant surface. PP honeycomb consists of polypropylene hollow-chamber panels and is particularly suitable when the overall weight of the construction needs to be kept as low as possible. PP honeycomb is up to 60% lighter than birch wood. There are also differences when it comes to branding: Surf and PP honeycomb can be printed partially or across the full surface, while the Phenol surface cannot be printed due to its material properties.
Which wheel and trolley solutions are available for the Cargo Air?
The Cargo Air can be equipped with different mobility solutions depending on its size, contents and transport requirements. Options include a telescopic handle with corner wheels in an integrated metal housing, or larger, sturdy externally mounted wheels that are particularly suitable for more demanding transport routes and uneven surfaces. Depending on the desired handling, these wheels can be configured as fixed castors or swivel castors. This allows the mobility solution to be individually adapted to the transport route, case size and intended use. Recessed handles complement the construction and enable space-saving, transport-friendly handling.
What individual and technical interior equipment can be developed for a Cargo Air?
The interior of a Cargo Air is individually adapted to the products being transported and the way they need to be secured. In addition to classic foam inserts, structural solutions can also be implemented, such as wooden constructions, permanently installed internal walls or continuous angle rails. Mounting plates can, for example, be attached to these rails, allowing devices or components to be positioned securely. Straps, removable elements or other technical installations can also be integrated on a project-specific basis. This means that not only the external case construction but also the interior is tailored to the specific transport purpose.
Explore more products
Alu Design
Aluminium case with impact-resistant plastic corners
Alu Light
Sturdy aluminium case with durable metal corners
Alu Framecase Plus
Stackable aluminium frame case with double-walled structure
Alu Robust
Aluminium case for demanding loads
Alu Solid Black Line
Industrial aluminium cases in 5 standard sizes
Alu Solid Silver Line
Industrial aluminium cases in 7 standard sizes
Cargo Air
Transport case with impact-resistant metal corners for contents over 40 kg
Vario Case
ABS hard case series available in 6 colours and 8 formats
Vario Case Pro
Award-winning hard shell case with reinforced plastic corners
Alu Briefcase
Elegant aluminium case with rounded corners for small parts
Alu Framecase
Simple case with continuous aluminium frame profile
Softshell-Bag
Made from high-quality textile fabric with zip and carrying strap
Travel Line
Plenty of space for your products, integrated castors and a practical pull-out handle
X-Press Box Classic-line
Sturdy boxes in 4 sizes and 4 colours for shipping small parts without outer packaging
X-Press Box Ocean-line
The protective delivery boxes made from recycled plastic in 2 sizes
Smart Case
Boxes made of durable ABS material in 8 standard sizes
Foam inserts
Customised inserts made of rigid foam for product presentation
Sinora Case
Hardshell protective transport cases for the safe transport of products
Aluminium cases
Cases with robust aluminium profiles and hard-wearing surfaces with plastic or metal corners
Hard shell cases
Cases made of robust ABS with or without reinforced corners
Aluminium etuis
Aluminium profiles with a resistant surface "Reef" and plastic corners
Flightcases
Transport case with internal handles for stacking. Lightweight.
Softbags
Made from high-quality textile fabric with zip fastener for use as a carrier bag or trolley
Delivery boxes
As plastic, recycled plastic or cardboard for shipping small parts
Plastic cases
Lightweight plastic case with flap fastener in black
Foam inserts
Customised foam inserts matched to your products
Protective cases
Made in Germany
at the gateway to the Black Forest
Customised products
according to the customer's wishes
Technical development
From design to series production in-house
Optimised components
and high-quality surfaces with a unique design
Awarded
in design, quality and service
